User guide

3.13 SP

ARE

RTS

613-120000-700 Splashguard with Cal Port

600-003427-000 FP-High Temp Splashguard Adapter

65-037020-16H FP-HT Sensor Assembly

899-075M25-000 3/4 to M25 Adapter (used with P/N365-037020-16H to install in condulet)

925-525400-100 FP-524C Plug-in control circuit

500-005065-007 Connector board

327-000000-000 Programming Magnet

897-850800-000 3-port enclosure less cover

897-850700-000 Enclosure glass lens cover

960-202200-000 Condensation prevention packet (replace annually).

3.14 WARRANTY

Detcon, Inc., as manufacturer, warrants each LEL High Temp Sensor Assembly (part no. 365-037020-16H), for a

two year period under the conditions described as follows: The warranty period begins on the date of shipment to

the original purchaser and ends two years thereafter. The sensor element is warranted to be free from defects in

material and workmanship. Should any sensor fail to perform in accordance with published specifications within

the warranty period, return the defective part to Detcon, Inc., 3200 A-1 Research Forest Dr., The Woodlands, Texas

77381, for necessary repairs or replacement.

3.15 SERVICE POLICY

Detcon, Inc., as manufacturer, warrants under intended normal use each new MicroSafe™ plug-in control circuit to

be free from defects in material and workmanship for a period of two years from the date of shipment to the origi-

nal purchaser. Detcon, Inc., further provides for a five year fixed fee service policy wherein any failed transmitter

shall be repaired or replaced as is deemed necessary by Detcon, Inc., for a fixed fee of $55.00. The fixed fee service

policy shall affect any factory repair for the period following the two year warranty and shall end five years after

Model FP-524HT Combustible Gas Sensor PG.20