Instruction Manual

RXT-320 Wireless Modbus™
RXT-320 Wireless IM Rev. 2.1 Page 8 of 27
8-32 tapped
ground point
1
4
" mounting
holes x2
T-Outlet Box
w/Drain
5.5"
6.1"
3.5"
2.5"
8"
7"
5"
RXT Series Wireless Transceiver
3
4
" NPT Ports
Wall (or other
mounting surface )
7.135"
7
16
" mounting
holes x4
3
8
" mounting
holes x4
10" Typ.
Detcon Mounting Plate
(Optional )
Custom Aluminum J-Box
(For Battery Option )
15.7"
Figure 9 RXT-320 Wireless Transceiver w/Battery Assembly and Mounting Dimensions
2.2.1 Remote Mounting
The RXT-320 wireless transceiver is normally connected directly to the J-Box containing the battery/terminal
board assembly. In situations where RF line-of-sight is diminished by obstructions, it may be necessary to
remotely mount the wireless transceiver away from this J-Box. Remote separation distances of up to 15 feet
are possible with the recommended cable. Such an installation will require an additional J-Box which
connects to the separated transceiver and houses Detcon’s 12-position terminal board plus additional hardware
(See Figure 10).