DETCON MODEL SW-AV2-DV1 Hazardous Duty Class I. Div 1, Multi-tone Alarm Station Operator’s Installation and Instruction Manual DETCON, Inc. 4055 Technology Forest, Suite 100 The Woodlands, Texas 77381 Ph.281.367.4100 / Fax 281.298.2868 www.detcon.com March 11, 2014 • Document #4487 • Revision 0.
SW-AV2-DV1 This page left intentionally blank Table of Contents SW-AV2-DV1 Instruction Manual ii
SW-AV2-DV1 1.0 1.1 1.2 1.3 1.4 Description................................................................................................................................................ 1 Strobe/Horn Alarm ............................................................................................................................... 2 Smart Battery Pack...............................................................................................................................
SW-AV2-DV1 This page left intentionally blank Shipping Address: 4055 Technology Forest, Suite 100, The Woodlands Texas 77381 Mailing Address: P.O. Box 8067, The Woodlands Texas 77387-8067 Phone: 888.367.4286, 281.367.4100 • Fax: 281.292.2860 • www.detcon.com • sales@detcon.
SW-AV2-DV1 1.0 Description The Detcon SW-AV2-DV1 Alarm Stations are wireless, battery powered alarm stations with two 5 Joule Strobes and an 110Db @ 1mtr Horn. The SW-AV2-DV1 uses a Horn/Strobe Combo Alarm and a Single Strobe Alarm. The unit is designed for installation and use in hazardous duty, corrosive work environments rated at Class 1, Division 1, Groups C and D.
SW-AV2-DV1 wireless transceiver will provide the interconnect PCAs with the signal(s) necessary to activate the proper alarm(s). If the unit uses the RXT-320 Transceiver, the rotary switch on the Wireless Alarm Interconnect PCA is used to set the Modbus Address of the alarm unit. If more than one alarm station is used in the system, each alarm station must have a unique address for the alarm station to be recognized on the network properly. This switch is not used with the RXT-300 Transceivers. 1.
SW-AV2-DV1 Figure 4 Smart Battery Pack NOTE: The Wireless Alarm Station can also be powered by a customer provided external DC power source. Refer to section 2. 1.3 Quad Battery Charger (Optional) Detcon’s Smart Battery Pack can be charged as needed using Detcon’s optional Quad Battery Charger which can charge up to four battery packs at one time. The Quad Battery Charger comes with a plug-in AC/DC adapter that plugs into a standard 120VAC outlet for power.
SW-AV2-DV1 When first powered on and with no battery packs connected to the charger, all the LED indicators on the Quad Charger should be green. When a battery pack is seated into a charging port, the “CHARGE” LED will go from green to red indicating the battery pack is not sufficiently charged. Once fully charged, the LED will go from red to green and the battery pack is ready to be used. The “Fault” LED should remain green indicating that there are no problems with the battery pack or charging port.
SW-AV2-DV1 2.0 Installation NOTE: The wireless alarm station is a precision instrument and care should be taken when handling it. The Wireless AV1-DV1 Alarm Station is made to be mounted on a 2” or 3” diameter pipe. Two 3” U-bolts with hardware are provided for mounting. The location for mounting the wireless alarm station should be carefully selected. Occasional access to the unit will be necessary for battery replacement and maintenance. 28.5" Typ. Wireless Transceiver RXT-300 or RXT-320 7.
SW-AV2-DV1 3.0 Operation The Wireless AV2 C1D1 Alarm Stations provide two strobes and a horn. The wireless alarm station is set to respond to alarms from the controlling unit. The controller has independent control over the strobes and the Horn, and they will be activated when the appropriate alarm is activated. All strobes have a flash rate of 1 Hz, one flash per second. The horn has up to 32 possible settings, for use in different configurations. The default settings of the horn are factory set.
SW-AV2-DV1 Sound Signal 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 Continuous note Continuous note Interrupted tone Interrupted tone Interrupted tone Interrupted tone Interrupted tone Interrupted tone Interrupted tone Interrupted tone Interrupted tone Interrupted tone Int,fast,rising volume Fast siren Rising constant,fall ISO 8201 Evacuation Fast whoop Slow whoop Reverse sweep Siren Frequency Repetition Rate 2300 440 1000 2.0 420 1.25 1000 0.5 2500 0.25 2500 0.5 700 6/12 1000 1.0 700 4.
SW-AV2-DV1 5.0 Specifications Voltage Operating Current Dome Colors Dome Guard Strobe Output Flash Rate Horn Output Horn Tone Operating Temperature Minimum Operating Temperature Maximum Enclosure Rating Dimensions 24VDC 810mA @ 24VDC; 350mA Horn Typical 220mA Strobe Typical Amber / Blue / Clear / Green / Red / Opal / Yellow Included 5Joules 1 per second 110db(A) @ 1 meter Selectable -20C +60C CID1, Gas Group CD; CIID1, Gas Group EFG 28”H X 29”W X 8”D AV1 6.0 Warranty Detcon Inc.
