Instruction Manual

Model TP-524D-HRT

TP-524D-HRT Instruction Manual Rev. 0.3 Page 45 of 48

Storage Temperature: -35°C to +55°C (-31°F to +131°F)

Operating Humidity: 5-100% RH (Non-condensing)

Operating Pressure: Ambient ± 10%

Air Velocity: 0-5 meters/second

Mechanical Specifications

Dimensions: 10”H (including Splashguard) x 6.1”W x 4.3”D

(254mmH x 155mmW x 109mmD)

3 each ¾”NPT Female Input Ports

¼” Mounting Holes (J-box) 5.5” (140mm) Center to Center.

Weight: 6 lbs. (2.72kg) (with aluminum j-box)

9 lbs. (4.08kg (with Stainless Steel j-box)

Electrical Specifications

Input Voltage: 12-28 VDC

Power Consumption: Normal operation = 68mA (<1.7 watt); Maximum = 85mA (2 watts)

RFI/EMI Protection: Complies with ISO 92.0.01

Analog Output: Linear 4-20mA DC current (1000 ohms maximum loop load @ 24VDC)

0mA All Fault Diagnostics

2mA In-Calibration

4-20mA 0-100% full-scale

22mA Over-range condition

HART Version 7.0

Manufacture ID 0x6007

Device ID 0xE08B

Status Indicators: 4-digit LED Display with gas concentration,

full-script menu prompts for AutoSpan,

Set-up Options, and Fault Reporting

LEDs for Fault and Calibration

Faults Monitored: Heater Fault, Loop Fault, Input Voltage Fault, Sensor Fault,

Processor Fault, Memory Fault, Calibration Fault(s)

Cable Requirements: Power/Analog – 3-wire shielded cable

Maximum distance is 13,300 feet with 14 AWG