Product Manual

0065-0834-0M Rev C • 8500/8550 Service Manual
18
PARTS IDENTIFICATION, CONT.
Column and Latch Assembly – 0065-D339-2A
ITEM
QTY
PART NUMBER
DESCRIPTION
1 1 0031-B014-08 SPACER
2
1
0065-B351-08
LINK BAR
3 1 0065-B352-0A LATCH WELDMENT
4 1 0065-B373-0A LOWER LATCH BLOCK
5 2 0065-B374-08 LATCH SPACER
6
1
0065-B442-08
LATCH SHAFT
7 1 0065-C338-0A COLUMN WELDMENT
8 1 0065-C347-08 GUIDE, LATCH
9
1
0065-C443-08
GUIDE, LATCH LOWER
10 8 6021-0665 #6-32 X 3/8 PAN HD CAP SCW Z/P
11 1 6021-1020 SCW ROUND HEAD #10-32 X 0.375
12
1
6022-0027
SPRING, EXT. 1 7/8 LONG
13 1 6680-0030 WASHER FLAT 1/4 NYLON
14 1 6680-0038 WASHER FLAT #10 NYLON
16 .01 6560-0021 ADHESIVE LOCTITE 222-31 LO-STRENGTH 50ML
NOTES:
1. Check part fit prior to assembly. Remove paint buildup, or material from column weldment
as required to allow pivot pin installation and to allow latch to slide without binding.
2. None.
3. Apply Loctite (6560-0021) to bottom threads. Tighten until spacer is held against latch slide.
The spacer must pass through the linkage, washer and latch guide.
4. Radius of item 4 must face up.