Product Manual

Lowering Scale From Transport
Position To Floor.
1. From transport position, stand close to scale with your
feet 8 to 12 inches apart.
2. Firmly grasp handles on scale.
3. While stepping back, lower scale to floor, keeping your
back straight and bending your knees until you’re in a
squatting position. Never bend at the waist with your
legs straight!
DO NOT DROP SCALE!
Lifting Scale From Floor
To Transport Position.
1. Stand close to scale with your feet 8 to 12 inches
apart.
2. Keeping your back straight, bend your knees until
you’re in a squatting position. Never bend at the waist
with your legs straight!
3. Firmly grasp handles on scale and lift straight up.
Don’t twist to either side. Keep the scale close to you,
not at arm’s length.
4. Use your leg muscles as you lift. Keep your back
upright and in its natural posture. Lift steadily and
smoothly without jerking.
For storage, lay scale flat for maximum protection against
damage.
FOR INDICATOR SET-UP AND OPERATION, REFER
TO SPECIFIC INDICATOR MANUAL.
This scale weighs approximately 100 pounds.
If you think it is too heavy for you to lower or
lift safely, ask someone to help you. Damage
to the Load Cells can occur if the scale is dropped or allowed to fall from the
transport position. If damage to the scale is determined to have been
caused by falling or dropping the scale, the warranty will be voided!
Operating Instructions
for CR Semi-Portable Scale
CARDINAL SCALE MFG. CO.
P.O. Box 151, Webb City, MO 64870 USA 0067-C043-08
Ph. 417-673-4631 or 800-641-2008 – Fax [phone] Rev B 03/02
Web Site – www.detectoscale.com
Caution!