Product Manual

0031-M214-O1 Rev. A y HS25KGP
UNPACKING
1. Open box.
2. Remove top Styrofoam insert from box.
3. Next, remove S-hook from insert and set aside.
4. Grasp scale and remove from box.
5. Remove Pants (baby sling seat) from box.
6. Remove bottom Styrofoam insert from box.
7. Turn insert over to locate second S-hook.
8. Remove S-hook from insert and set aside.
9. Remove scale from plastic bag.
10. Remove cardboard dowel between scale case
and lower loop.
11. Scale is now ready to use.
OPERATION
1. Referring to Figure No. 1, install S-hooks on scale.
2. Unfold Pants (Baby Sling Seat).
3. Hang Pants on lower S-hook. See Figure No. 1.
4. Referring to Figure No. 2, turn Zero Adjust Knob
until dial pointer is reading “0”.
5. Place baby in Pants.
6. The dial pointer will indicate the baby’s weight.
7. Remove baby from Pants and re-zero scale if necessary.
CAUTION! DO NOT LEAVE BABY
UNATTENDED IN PANTS (BABY SLING SEAT)!
CARE AND CLEANING
x DO NOT spray; water directly on the scale.
x DO clean scale using a damp, soft cloth and mild detergent.
NOTE! Some types of paper towels may scratch the dial lens.
x DO NOT use acetone, alcohol, or other volatile solvents for cleaning.
PARTS LIST
ITEM QTY PART NUMBER DESCRIPTION
1 4 6600-1870 Lens Screw
2 1 6600-1871 Lens
3 2 6600-1872 S-Hook
4 1 HSPANT Pants (Baby Sling Seat)
Zero
Adjust
Knob
Figure No. 1
Figure No. 2