FCC ID:2AWG7-SLIMPRO SlimPRO Talking Low-Profile Health Scale Operation Manual Bascula de salud parlante de bajo perfil Manual de funcionamiento 8525-M336-O1 Rev B SlimPRO Operation 1
PROPER DISPOSAL When this device reaches the end of its useful life, it must be properly disposed of. It must not be disposed of as unsorted municipal waste. Within the European Union, this device should be returned to the distributor from where it was purchased for proper disposal. This is in accordance with EU Directive 2002/96/EC. Within North America, the device should be disposed of in accordance with the local laws regarding the disposal of waste electrical and electronic equipment.
FEATURES Capacity: 600 lb x 0.1 lb / 272 kg x 0.1kg Weight Indication Display: Voice: Four-digit, seven segment LCD, 1.4 in / 36 mm high digits with blue backlight English, Spanish, French, Arabic, Hindu, Chinese, OFF Indicators: Weight, Height, BMI Calculation, Low Battery, Mother and Baby Mode Functions: Mother and Baby weighing mode Baby weight starts from 2.
WEIGHING UNIT SWITCH The weighting unit switch is a push-button switch located on the bottom of the scale. Pressing the switch will toggle the weighing units between kg (kilograms) and lb (pounds). NOTE: The default weighing unit setting is lb. 1. With the scale off, using the end of a pen, press the push-button. 2. The Zero weight and current weighing unit setting will be shown on the display, e.g. “. kg”. 3. Press the push-button again to toggle to lb. Weighing Unit push-button switch 4.
INSTALLING THE CARPET FEET If you are using your scale on a carpet, we recommend that you use the included carpet feet. To install the carpet feet, perform the following: 1. Remove the four (4) carpet feet from the packaging. 2. Turn the scale over and locate the four (4) existing feet on the bottom of the scale. 3. Align the prongs of one carpet foot with the holes in one of the scale's existing feet. 4.
OPERATION Weighing Only Mode 1. Step on the scale. It will turn on automatically. 2. The scale will measure your weight. Once stable, the display will blink several times and then lock onto your weight. If the voice mode is on, the scale will announce your weight (in the selected language and weighing units). For example, if (English) has been selected for the language and lb (pounds) for the weighing units, the scale will speak “Your weight is 163.5 pounds” in English. 3.
OPERATION, CONT. Mother and Baby Weighing Mode 1. With the scale off, press the button to enter the Mother and Baby weighing mode. 2. The display will change to show “. lb” with the icon flashing. 3. The mother steps on the scale. 4. The display will blink several times, and then lock onto the mother’s weight with the icon on. If the voice mode is on, the scale will announce your weight (in the selected language and weighing units).
BLUETOOTH FUNCTIONS Bluetooth Pairing To pair a Bluetooth-capable device with the scale, select the name of the scale “Chipsea-BLE” from the list of available connections. Weight Data GATT Service ID: 0000fff0-0000-1000-8000-00805f9b34fb Characteristic ID: 0000fff1-0000-1000-8000-00805f9b34fb (Need to subscribe to get data) 0 1 2 3 Packet Header 0xFA 6 4 5 7 to 19 Weight (high bit in front, low bit after) Not used Data 0x04 (Temporary Weight) or 0x05 (Lock weight) Abnormal information: 0.
TROUBLESHOOTING GUIDE The following guide will assist you in determining errors and problems you may encounter with your Detecto® SlimPro Low-Profile Health Scale. SYMPTOM POSSIBLE CAUSE POSSIBLE SOLUTION Err0 is displayed for about 2 seconds and the scale turns off. Initialization Error Step off the scale. Press lightly on the scale to re-initialize it. The display will show a moving zero and then turn off. The scale is ready for use again.
STATEMENT OF LIMITED WARRANTY Detecto Scale warrants its equipment to be free from defects in material and workmanship as follows: Detecto warrants to the original purchaser only that it will repair or replace any part of equipment which is defective in material or workmanship for a period of two (2) years from date of shipment. Detecto shall be the sole judge of what constitutes a defect.
STATEMENT OF LIMITED WARRANTY Conditions Which Void Limited Warranty This warranty shall not apply to equipment which: A.) Has been tampered with, defaced, mishandled or has had repairs and modifications not authorized by Detecto. B.) Has had serial number altered, defaced, or removed. C.) Has not been grounded according to Detecto’s recommended procedure. Freight Carrier Damage Claims for equipment damaged in transit must be referred to the freight carrier in accordance with freight carrier regulations.
FCC statements: The device has been evaluated to meet general RF exposure requirement, The device can be used in portable exposure condition without restriction This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
