Operation Manual

8525-M336-O1 Rev B  SlimPRO Operation
3
INSTALLING THE CARPET FEET
If you are using your scale on a carpet, we recommend that you use the included carpet feet.
To install the carpet feet, perform the following:
1. Rem
ove the four (4) carpet feet from the packaging.
2. Tu
rn the scale over and locate the four (4) existing feet on the bottom of the scale.
3. Al
ign the prongs of one carpet foot with the holes in one of the scale's existing feet
.
4.
I
nsert the carpet foot prongs into the holes, making sure the prongs align straight up and
down with the holes of the scale foot
.
5.
B
eing careful not to twist the carpet foot, and with even pressure, gently push straight
down on the carpet foot to seat it into the scale foot
.
6.
Re
peat steps 3 through 5 for the other three (3) scale feet.