Fook Tin Technologies Ltd. CONFIDENTIAL DOCUMENT Model No:SLIMTALKXLBT FCC ID:2AWG7-SLIMTALKXLBT SlimTalkBT Scale Operation flow Fook Tin Technologies Ltd. © 2017 Fook Tin Technologies Ltd. All Rights Reserved. SlimTalk scale P.
Fook Tin Technologies Ltd. CONFIDENTIAL DOCUMENT SlimTalk Scale Operation Flow Revision History: Date Rev. 08-Jul-20 Item 0.0 Add BLE feature By Randy 1 Features 1.1 Weight capacity: 550lb/0.1lb 1.2 Sensor on weight: 5kg/11lb 1.3 Overload: 105% of capacity 1.4 Indicator of overload: Err 1.5 Auto-off time: - Showing 0.0: - Weight is locking: - Unstable weight: 1.6 250kg/0.
Fook Tin Technologies Ltd. CONFIDENTIAL DOCUMENT 3 LCD Outlook 4 Operation Notes: For the very first time the scale is used, you must tap the scale to see 0.0 on the display, and you need to wait 10 seconds for it to turn off. Then you can start using the scale normally by just standing on it to display or speak your weight. 4.1 Open SlimTALK APP on mobile phone. There are two red dashes on the screen. SlimTalk scale P.
Fook Tin Technologies Ltd. CONFIDENTIAL DOCUMENT 4.2 Step on the scale, the two red dashes on mobile phone will become green. It means BLE connection is established. 4.3 On the scale, the weight value will blink 3~4 times then lock and at the same time the scale speak the weight if the language is selected. On mobile phone, it shows the weight at the same time. SlimTalk scale P.
Fook Tin Technologies Ltd. 4.4 CONFIDENTIAL DOCUMENT Step off the scale, the reading will keep showing for around 10 seconds, then auto turn off with a voice. And SlimTALK APP will go back to two red dashes. Remark: - The weight unit can be changed by pressing the button on the back of the scale. - The language spoken can be changed by using the switch on the back of the scale. SlimTalk scale P.
FCC statements: The device has been evaluated to meet general RF exposure requirement, The device can be used in portable exposure condition without restriction This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
