Product Manual

13
The “Commands” menu option is used to send commands to the weight indicator. Refer to the
indicator profile to configure the data to be sent to the indicator for each command. Any
commands that are not defined in the indicator profile will be disabled (shown in gray).
Click “Zero” to send the zero command to the weight indicator. Some models of weight
indicators do not support the capability of zeroing from the computer so this command may be
ignored.
Click “Units” to switch the weight indicator between pounds and kilograms. Some models of
weight indicators do not support this capability so this command may be ignored.
Click “Gross”, “Tare”, or “Net” to switch the weight indicator mode. Some models of weight
indicators do not support this capability so this command may be ignored.
Click “Command 1” through “Command 10” to send custom commands to the indicator.
Count
Click the “Settings” menu.