Product Manual

30
15. The display will show “GroSS=”. Press “ENTER”. The display will show the current
tab setting for the gross weight. Press the “*” key to change the values and the “UNITS”
key to move the cursor as necessary until the display shows “3.01”. Press “ENTER”.
16. The display will show “tArE=”. Press “ENTER”. The display will show the current tab
setting for the tare weight. Press the “*” key to change the values and the “UNITS” key
to move the cursor as necessary until the display shows “4.01”. Press “ENTER”.
17. The display will show “nET=”. Press “ENTER”. The display will show the current tab
setting for the net weight. Press the “*” key to change the values and the “UNITS” key to
move the cursor as necessary until the display shows “5.01”. Press “ENTER”.
17. The display will show “G ACC=”. Press “ENTER”. The display will show the current
tab setting for the gross accumulator. Press the “*” key to change the values and the
“UNITS” key to move the cursor as necessary until the display shows “0.00”. Press
“ENTER”.
17. The display will show “n ACC=”. Press “ENTER”. The display will show the current
tab setting for the net accumulator. Press the “*” key to change the values and the
“UNITS” key to move the cursor as necessary until the display shows “0.00”. Press
“ENTER”.
17. The display will show “CrLF=”. Press “ENTER”. The display will show the current
setting for carriage return line feed. Press the “*” key to until the display shows “YES”.
Press “ENTER”.
17. The display will show “EoP=”. Press “ENTER”. The display will show the current
setting for end of print. Press the “*” key to until the display shows “0”. Press “ENTER”.
1. Press”*” and “PRINT” to set the print format. The display shows “Prt=”
2. Press “ENTER”. The display will show the current print format. Press “*” until this is
“0”. Press “ENTER”.
210CAP – Permits print capture of gross, tare, and net weight.
210 Setup –
1. Press “*”. The display will show “Funct=”. Press “REVIEW”.
2. The display will show “PUO=” Press “ENTER”. The display will show “no”. Press
“ENTER.”
2. The display will show “td=” Press “ENTER”. The display will show “12”. Press
“ENTER.”
2. The display will show “d oUt=” Press “ENTER”. The display will show “0”. Press
“ENTER.”
3. The display will show “SLEEP=”. Press “ENTER”. The display will show the sleep
value. Press “ENTER”.
4. The display will show “A off=”. Press “ENTER”. The display will show the auto-off
setting. Press “ENTER”.
5. The display will show “CLTar=” Press “ENTER”. The display will show the clear-tare
setting. Press “ENTER”.