Product Manual

31
6. The display will show “Sio?” Press “ENTER”. The display will show “no”. Press the
“1/YES” key to change the display to “YES”. Press “ENTER”.
7. The display will show “bAUd=” Press “ENTER”. The display will show the current
baud rate setting. For the default 9600 baud press the “9” and “6” key so that the
display shows “96”. Press “ENTER”.
8. The display will show “PrtY=” Press “ENTER”. The display will show the current parity
setting. For the default no parity press the “0” key so that the display shows “0”. Press
“ENTER”.
9. The display will show “BitS=” Press “ENTER”. The display will show the current data
bits setting. For the default eight data bits press the “8” key so that the display shows
“8”. Press “ENTER”.
10. The display will show “StoP=” Press “ENTER”. The display will show the current
stop bits setting. For the default one stop bit press the “1” key so that the display shows
“1”. Press “ENTER”.
11. The display will show “Cont1=” Press “ENTER”. The display will show the current
setting for continuous data for serial port one. For printer capture the indicator must not
be continuous. Press the “0/NO” key so that the display shows “no”. Press “ENTER”.
12. The display will show “Cont2=” Press “ENTER”. The display will show the current
setting for continuous data for serial port two. For printer capture the indicator must not
be continuous. Press the “0/NO” key so that the display shows “no”. Press “ENTER”.
13. The display will show “Print?”. Press “ENTER”. The display will show “no”. Press
the “1/YES” key to change the display to “YES”. Press “ENTER”.
14. The display will show “Port=”. Press “ENTER”. The display will show the serial port
selected for printer output. Press the “1” or “2” key to set this to the correct port to be
connected to the computer. If only one serial port is wired from the 210 indicator this
would usually be “1”. Press “ENTER”.
15. The display will show “HoUr=”. Press “ENTER”. The display will show the current
tab setting for the time. Press the “0” key to change the to “0.00” so that the time is not
provided in the output. Press “ENTER”.
15. The display will show “dAte=”. Press “ENTER”. The display will show the current tab
setting for the date. Press the “0” key to change the display to “0.00” so that the date is
not provided in the output. Press “ENTER”.
15. The display will show “CnC n=”. Press “ENTER”. The display will show the current
tab setting for the consecutive number. Press the “6”, “0”, and then the “1” key to
change the display to “6.01” so that the consecutive number is provided on the sixth line
of the output. Press “ENTER”.
15. The display will show “GroSS=”. Press “ENTER”. The display will show the current
tab setting for the gross weight. Press the “2”, “0”, and then the “1” key to change the
display to “2.01” so that the gross weight is provided on the second line of the output.
Press “ENTER”.
16. The display will show “tArE=”. Press “ENTER”. The display will show the current tab
setting for the tare weight. Press the “3”, “0”, and then the “1” key to change the display
to “3.01” so that the tare weight is provided on the third line of the output. Press
“ENTER”.
17. The display will show “nET=”. Press “ENTER”. The display will show the current tab
setting for the net weight. Press the “4”, “0”, and then the “1” key to change the display