Manualshelf

Product Manual

ManualsBrandsDetecto ManualsScale AccessoriesDynamic Data Exchange Program
29303132333435363738
32
to “4.01” so that the net weight is provided on the fourth line of the output. Press
“ENTER”.
17. The display will show “G ACC=”. Press “ENTER”. The display will show the current
tab setting for the gross accumulator. Press the “0” key to change display to “0.00” sot
that the gross weight accumulator is not provided on the output. Press “ENTER”.
17. The display will show “n ACC=”. Press “ENTER”. The display will show the current
tab setting for the net accumulator. Press the “0” key to change the display to “0.00” so
the net weight accumulator is not provided on the output. Press “ENTER”.
17. The display will show “CoUnt=”. Press “ENTER”. The display will show the current
tab setting for the count. Press the “0” key to change the display to “0.00” so the count
is not provided on the output. Press “ENTER”.
17. The display will show “EACH=”. Press “ENTER”. The display will show the current
tab setting for the each. Press the “0” key to change the display to “0.00” so the each
value is not provided on the output. Press “ENTER”.
17. The display will show “CrLF=”. Press “ENTER”. The display will show the current
setting for carriage return line feed. Press the “1/YES” key so that the display shows
“YES”. Press “ENTER”.
17. The display will show “EoP=”. Press “ENTER”. The display will show the current
setting for end of print. Press the “0” key so that the display shows “0”. Press “ENTER”.
1. Press”*” and “PRINT” to set the print format. The display shows “Prt=”
2. Press “ENTER”. The display will show the current print format. Press the “0” key so
that the display shows “0”. Press “ENTER”.
738_CAP – Permits print capture of ID, Time/Date, CN, gross, tare, and net weight.
738 Setup –
S2=10000000
Tabs t = 0-10
Tabs d= 0-1
Tabs id= 1-0
Tabs Cn= 2-0
Tabs G= 3-0
Tabs TA=4-0
Tabs n= 5-0
You can test this with the 738 by storing a keyboard tare "*" TARE type a value such as 100 and press
enter. You must have at least that much weight on the scale. Then press "*" NET print, to print the gross,
tare, net ticket. WinDDE will catch the ticket fields and put them into excel.