Product Manual

33
How to get GROSS TARE NET from the 210 to WinDDE
To get the output shown below the indicator tabs must be set correctly as well as some additional setup in WinDDE.
The additional setup in WinDDE is not extensive, it is only a slight modification to the 210_CAP profile.
If a profile named 210_PRINT does not exist it will need to be created, otherwise just choose the 210_PRINT. To
create the 210_PRINT profile, choose the 210_CAP profile and click the edit button beside it. An Indicator Profile
window will popup. There are only a couple of changes that need to be made here.
1) Change the ID from 210_CAP to 210_PRINT (changing the name creates a new profile)
2) In the Print Capture section there are several tabs shown.
Tabs 4, 5, & 6 need to be changed to have a Flag of 0 and DDE Item should be blank.
3) Click OK