Product Manual

12. The display will show “Cont2=” Press “ENTER”. The display will show the current setting for

continuous data for serial port two. For printer capture the indicator must not be continuous. Press the

“0/NO” key so that the display shows “no”. Press “ENTER”.

13. The display will show “Print?”. Press “ENTER”. The display will show “no”. Press the “1/YES” key to

change the display to “YES”. Press “ENTER”.

14. The display will show “Port=”. Press “ENTER”. The display will show the serial port selected for printer

output. Press the “1” or “2” key to set this to the correct port to be connected to the computer. If only one

serial port is wired from the 210 indicator this would usually be “1”. Press “ENTER”.

16. The display will show “HoUr=”. Press “ENTER”. The display will show the current tab setting for the

time. Press the “0” key to change the to “0.00” so that the time is not provided in the output. Press

“ENTER”.

17. The display will show “dAte=”. Press “ENTER”. The display will show the current tab setting for the

date. Press the “0” key to change the display to “0.00” so that the date is not provided in the output. Press

“ENTER”.

18. The display will show “CnC n=”. Press “ENTER”. The display will show the current tab setting for the

consecutive number. Press the “0” key to change the display to “0.00” so that the consecutive number is

provided on the sixth line of the output. Press “ENTER”.

19. The display will show “GroSS=”. Press “ENTER”. The display will show the current tab setting for the

gross weight. Press the “2”, “0”, and then the “1” key to change the display to “2.01” so that the gross

weight is provided on the second line of the output. Press “ENTER”.

20. The display will show “tArE=”. Press “ENTER”. The display will show the current tab setting for the tare

weight. Press the “3”, “0”, and then the “1” key to change the display to “3.01” so that the tare weight is

provided on the third line of the output. Press “ENTER”.

21. The display will show “nET=”. Press “ENTER”. The display will show the current tab setting for the net

weight. Press the “4”, “0”, and then the “1” key to change the display to “4.01” so that the net weight is

provided on the fourth line of the output. Press “ENTER”.

22. The display will show “G ACC=”. Press “ENTER”. The display will show the current tab setting for the

gross accumulator. Press the “0” key to change display to “0.00” sot that the gross weight accumulator is

not provided on the output. Press “ENTER”.

23. The display will show “n ACC=”. Press “ENTER”. The display will show the current tab setting for the

net accumulator. Press the “0” key to change the display to “0.00” so the net weight accumulator is not

provided on the output. Press “ENTER”.

24. The display will show “CoUnt=”. Press “ENTER”. The display will show the current tab setting for the

count. Press the “0” key to change the display to “0.00” so the count is not provided on the output. Press

“ENTER”.

25. The display will show “EACH=”. Press “ENTER”. The display will show the current tab setting for the

each. Press the “0” key to change the display to “0.00” so the each value is not provided on the output.

Press “ENTER”.

26. The display will show “CrLF=”. Press “ENTER”. The display will show the current setting for carriage

return line feed. Press the “1/YES” key so that the display shows “YES”. Press “ENTER”.

27. The display will show “EoP=”. Press “ENTER”. The display will show the current setting for end of

print. Press the “0” key so that the display shows “0”. Press “ENTER”.