Product Manual

7
For the 200 series indicator configuration described above select "9600."
Parity
For the 200 series indicator configuration described above select "N" for no parity.
Data
For the 200 series indicator configuration described above select "8" for eight data bits.
Stop
For the 200 series indicator configuration described above select "1" for one stop bit.
TCP/IP
To communicate with TCP/IP network indicators set the “Device Port” prompt to “TCP/IP”.
IP Address
Enter the appropriate IP Address for the indicator.
IP Port
Enter the appropriate IP Port for the indicator.
Ping Interval
Enter an interval in seconds to ping the device periodically.
Topic
A DDE topic name to be used by client applications to refer to the indicator is specified here.
COUNTING
Enable Counting
Check the “Enable Counting” check box to enable the piece counting feature.
Average Piece Weight
Specify the weight of each item.
Default Sample Size
Specify the quantity of items to be used for sampling.