User guide

67
Features and Menus The Menus
Please note: The username saved
here is a two-character abbrevia-
tion displayed on this telephone
only. It is not identical to the user-
name the administrator enters for a
user when configuring the
OpenCom 100 and which, for exam-
ple, is used in the central phone
book.
■ Language: Select a language
from the list and confirm with
OK . Display texts then appear in
this language.
■ Contrast: Select the level of the
display contrast (1 … 7) via en-
tering a digit or with the arrow
keys and confirm with
OK .
“Protection” Menu
Select Protection and then
select …
Call protect.: This switches the sig-
nalling of calls for all call numbers of
your device On/Off (with the excep-
tion of VIP calls). You can activate (
“ )
call protection for internal calls only,
for external calls only or for all calls.
When call protection is activated,
the caller hears either the ring or the
busy tone (the system administrator
configures this when configuring
user groups).
Please note: Call protection is only
activated on the terminal on which
it was set. Even if your internal call
number of the terminal is available
(that is, also on other terminals)
more than once, call protection is
not automatically activated there.
Telephone lock: Enter your device
PIN. Activating the telephone lock
switches your telephone to a lower
external access authorisation level.
External dialling may then be par-
tially or fully restricted. Emergency
call numbers can be stored in a spe-
cial list applicable to your user group
and can then always be dialled, irre-
spective of your external authorisa-
tion. For more information ask your
system administrator.
Baby call: Enter the destination call
number and activate or deactivate
the baby call (see also the chapter
entitled Baby Call starting on
page 47).
Change PIN: Enter your current
device PIN and then the new PIN
twice. If you have forgotten your
device PIN, contact your system
adminstrator.
Availability: All active features that
hinder your availability (call protec-
tion, call-waiting protection, call for-
warding) are cleared.
Call wait. Prot: During a telephone
conversation, no further calls are sig-
nalled by the call-waiting tone; the
caller hears the busy tone. Activate
this function with on.