Owner manual

STEP 1:
Remove collar
STEP 2:
Install cylinder
(Cylinder not Included)
STEP 3: Reinstall
collar assembly
OUTSIDE
(Metal Doors Only)
INSIDE
HOLES "a"
08MN / 09MN
"a"
Door Prep for Trim and Mounting Plate
"b"
"a"
08BN / 09BN
14BN
THRU HOLE
102995
1/2"
(13mm)
Trim Adapter
Plate
"a"
L161 Door Prep for Trim and Mounting Plate
(8mm)
5/16"
3/4"
(20mm)
HOLE "b"
"a"
Detex Corporation, 302 Detex Drive, New Braunfels, Texas 78130-3045
[phone] / 1-800-729-3839 / Fax [phone]
E-MAIL: [e-mail] INTERNET: www.detex.com
INSTALLATION INSTRUCTIONS FOR DETEX VALUE SERIES NARROW TRIM
R
Profile Cylinder Installation
(Cylinder not Included)
P/N 102281-X
Mortise Cylinder Installation
TEMPLATES ARE AVAILABLE ON WEBSITE
102995 November 3, 2009
Sheet 1 Side 1
Mortise Cylinder
Position Plate
P/N 100868
Cylinder Hex Nut
P/N 100783
Shaft Extension
P/N 101478
#6-32x1/2" Screw
P/N PP-5367-108
M3 PFH Metric Screw
P/N 103015-1
Cylinder Mounting Screw
included with cylinder
Reinstall
screws
1/4-20x1" LG Screws
P/N 100980
&
Mounting Plate
P/N 100696-1
provided with
panic hardware
1/4-20x1" LG Screws
P/N 100980
&
Mounting Plate
P/N 100696-1
provided with
panic hardware