User guide

DETEXI Basic Configuration 9 - 31

To register NVR on the Domain Controller as a member of domain network the NVR Exclusive Master

User should send request to get connected to the NVR Domain Controller. The authorization of request will

be required — credentials supplied by the NVR Domain Controller administrator should be provided.

1. Define NVR Domain Controller Address

1. In the NVR Control Center go to the General — Global Settings (Fig 3).

2. Under the NVR Controller Settings for HOST at the bottom enter the NVR Domain Controller IP

address or IP name in the Address and Port number — more fields/buttons appears.

9 Recommended port numbers — 60000 or 60001

Fig 3. NVR Control Center — General — Global Settings

(Define NVR Domain Controller Address.)

2. Define Location Name, Register

1. Enter the NVR name in to This Location Name (Fig 4).

2. Click Register site on Domain Controller toggle button.

3. Provide credentials supplied by the NVR Domain Controller administrator to send the registration

request.

One of the following messages will appear —