User guide

DETEXI Basic Configuration 10 - 31
9 Registration not complete — registration request is waiting to be accepted by the Domain
Controller;
9 Registration rejected — registration request is rejected by the Domain Controller;
9 Registered — registration request is successfully completed.
Fig 4. NVR Control Center — General — Global Settings
(Define NVR Domain Controller Address — Provide Credentials.)
Accept / Reject Registration on the Domain Controller
When a registration request from the NVR is received, the NVR Domain Controller administrator
(exclusive master user) can accept or reject the request or delay a decision and keep the NVR and
Domain Controller logical connection in a NEW mode when the Domain Controller can "see" the NVR
components and settings but can not remotely update any of them.
An appropriate message will appear on the NVR-requester and the Domain Controller:
1. Registered — the NVR registration request is accepted — the NVR Domain Controller will import and
keep up-to-date information about the remote (child) NVR cameras settings. Updating the NVR
settings from the Domain Controller will be allowed.
9 The NVR and Domain Controller will stay logically connected until the NVR or Domain Controller
administrator requests to unregister.
2. Registration Rejected — the NVR registration request is rejected — a logical connection between
the NVR and Domain Controller won’t be established.