User guide

DETEXI Basic Configuration 18 - 31
Fig 8. Domain Controller NVR Control Center — General — NVR Locations
(Get NVR Status in the Domain. Restart Windows.)
Update Child NVR Status
From the Domain Controller user interface — NVR Control Center — users can update the operational
status of all network video recorders in the domain.
1. In the Domain Controller NVR Control Center go to General — NVR Locations (Fig 9).
2. Select the NVR by its location name from the Servers Locations list.
3. On the Controlling tab click Get NVR Status button — additional buttons and the NVR services
panel appears.
4. To restart Windows on the child NVR Server click Restart Remote OS button.
5. To stop the selected child NVR click Stop Remotely button.
6. To restart the selected child NVR click Restart Remote NVR button.
7. Click on any service name to turn it red to stop the service or black — to run.
9 The color of the service name indicates its status — black while running, red while stopped.
8. To make the service monitored by the Monitor service check the service checkbox to enable
monitoring, uncheck — to disable.
9 During the system tuning you may need to disable restarting a service by the Monitor service;