User guide

DETEXI Basic Configuration 19 - 31
uncheck the service checkbox to disable monitoring, than you can click on any service name to
turn it red to stop the service or black — to run.
9. To synchronize the services with the current configuration click Synchronize Location button.
Fig 9. Domain Controller NVR Control Center — General — NVR Locations
(Update NVR Status in the Domain. Restart Windows. Restart NVR.)
9 NVR Services Synchronization — if the services were running during the
system configuration (runtime configuration) the services synchronization with the
current configuration is required on the NVRs where the changes were made. After
the synchronization these changes will take effect.
9
Managing Domain Users
The NVR Domain Controller maintains a single users list with security information for all domain users
and authenticates all Remote DETEXI Clients’ access. When Remote DETEXI Clients connect to the
domain resources such as cameras, settings or recorded video, they will be required to authenticate with
user settings defined in the NVR Domain Controller. The NVR Domain Controller has the ability to provide
different lists of cameras from any NVR location to different users, only allowing users to see and interact
with the cameras they have privileges for. In addition, permissions such as PTZ control, maximum