User guide

DETEXI Basic Configuration 20 - 31
connection time, task control, etc. are configurable on a per-user basis.
9 Any child NVR in the domain can have its own users list. This is not forbidden but is not necessary in
the NVR Domain Controller configuration. These users have access to this NVR resources only.
1. Add New User
1. In the Domain Controller NVR Control Center — Users — User Information select This Location
from the Servers Locations list, update the list (Fig 10).
9 This Location means the NVR Domain Controller.
9 To update a child NVR individual users list select the NVR by location name. Authentication
will be required.
Fig 10. Domain Controller NVR Control Center — Users — User Information
(Add New User to the Domain Controller Users List.)
2. Below the Users List click Add button to open blank User Information dialog (Fig 10);
— or —
Click Dup button to open a copy of selected user settings for editing.
3. Enter a single word, case-sensitive, alphanumeric User Name to use to login to the NVR.
4. Enter a single word, case-sensitive, alphanumeric User Password and re-type it to the User
Password Confirmation to be sure it is typed as desired.
5. Enter the Number of Active Users to define the number of Client instances the user can be signed
into simultaneously.
6. Enter Max connection time to define the number of minutes user can be continuously connected to