User guide

DETEXI Basic Configuration 22 - 31
Managing Cameras across Domain
When the NVR registration request to become a domain member is accepted — the NVR Domain
Controller imports and keeps up-to-date information about the remote (child) NVR cameras that allows
users to administer and control all cameras in the domain from a single interface.
9 Any updates made in the cameras settings on the NVR Domain Controller will be automatically
propagated to the child NVRs and vise versa.
9 When you are ready for your changes to take effect, you should synchronize the services running on
the NVR Domain Controller and the services running on the child NVR holding the updated cameras
with the current configuration.
9 Domain Controller usually doesn’t have its own cameras (though it is not forbidden) but provides
centralized user provisioning and management.
1. Update Camera Settings
To update camera settings in the Domain Controller NVR Control Center — Cameras select the camera
from the Cameras List grouped by the NVR Locations (Fig 11).
Fig 11. Domain Controller NVR Control Center — Cameras
(Update Camera Settings.)
Then you can view/update selected camera settings:
y Define camera connection and security settings
y Configure camera tours, groups, sequences and location maps