User guide

DETEXI Basic Configuration 6 - 31
Setup DETEXI NVR Domain
How to Setup NVR Domain?
Weather you want to centralize user access control and camera management for existing IP surveillance
system, or configure a new security installation consisting of several NVRs that are logically attached to
the NVR Domain Controller, there are several steps to follow.
1. Setup Exclusive Master Users
Before a secure connection between the NVRs and the NVR Domain Controller could be established at
least one user in every NVR and in the Domain Controller must be set as an Exclusive Master User
that will manage exclusive connection rights in the domain.
y The NVR administrator must provide the NVR exclusive master user login name and
password to the NVR Domain Controller administrator.
y The NVR Domain Controller administrator in turn must provide the Domain Controller exclusive
master user login name and password to every child NVR administrator.
2. Register NVR on the Domain Controller
To register NVR on the Domain Controller as a member of domain network (child NVR) the NVR
exclusive master user should send a request to get connected to the NVR Domain Controller.
y The authorization of request will be required — credentials supplied by the NVR Domain Controller
administrator should be provided.
3. Domain Controller Accepts (Rejects) the Registration Request
Subsequently the NVR Domain Controller administrator — exclusive master user — can accept or
reject the registration request from the NVR; or delay the decision and keep the NVR and Domain
Controller logical connection in a NEW mode when the Domain Controller can "see" the NVR
components and settings but can not remotely update any of them.
If the registration request is accepted — the NVR Domain Controller will import and keep up-to-date
information about the remote (child) NVR cameras’ settings. Updating the NVR settings from the
Domain Controller will be allowed. The NVR and the NVR Domain Controller will stay logically
connected until the NVR or Domain Controller administrator requests to unregister.
If the NVR registration request is rejected — a logical connection between the NVR and Domain
Controller won’t be established.
y The registration request in a NEW mode may be accepted or rejected at any time.
y On the Domain Controller side the authorization also will be required — credentials supplied by
the NVR administrator should be provided.