User guide

NVR

1.b. NVR Locations (only for “NVR Domain controller”)

When a request to connect to Domain controller is sent, this request can be:

• Either from a computer that is sending a connection request from within the same LAN (local IP

address is used)

• Or from a computer that is sending a connection request from another LAN (external IP address is

used).

For more information please refer to How to set up NVR Domain Controller

section provided later in this

document.

Fig. 4. NVR Setup →General→ NVR Location →Controlling

Fig. 5. NVR Setup →General→ NVR Location→Monitoring