User guide

NVR

4.d. Control Tour

Fig. 26. New → Action →Control Tour

When “Start tour” is selected, a pre-selected tour will start.

When “Stop tour on camera” is selected, the tour that is running will be stopped.

Action (Control Tour) Setup:

• Start Tour: when selected, a camera and a tour must also be selected from the pull down menu

• Stop Tour on camera: when selected, a camera must be selected from the pull down menu

• Reset touring after (e.g. 25) second(s)

• Uninterruptable tour action

• Use local connection (This option exists only for specific cameras).

Start tour

Stop tour