User guide

NVR
4
NVR Setup program
The heart of the Network Video Recorder is the NVR Setup program. This is where the setting for all
modules is done.
NVR Setup program deals with certain components and sets specific properties for each of them.
Major components of the NVR Setup program are as follows:
 General: which in turn consists of the following sub-components:
• Global settings
• NVR Locations (only for “NVR Domain controller”
)
• Camera location
• Voice setup
• FTP server
• Advanced
 Cameras: which in turn consists of the following sub-components:
• Camera list
• Cameras setting
• Security and Alarm
• Description
• Recording
- Schedule setting
- Motion setting
• Tour (for PTZ cameras only)
- Setup tour
- Setup schedule
 Users: which in turn consists of the following sub-components:
• User information
• Groups of cameras
• Billing information and restrictions
 Tasks: which in turn consists of the following sub-components:
• Action
- Record Camera
- Move Camera
- Control Relay
- Control Tour
• Notification
- Network Client
- Phone
- Email
- Speak
 Monitor: which in turn consists of the following sub-components:
• Camera ID
• Camera name
• Alarm status
• Touring status
• Alive status
• Recording status
 Report
Components and sub-components of the NVR setup system will be investigated in the following sections.