User guide

DETEXI NVR 104 - 169
Fig 71. NVR Control Center
(Information About Task Usage.)
Configure Action
Before any task could be assigned to a specific alarm/event it should be defined in the NVR. Each task is
a list of preconfigured actions and/or notifications that define what is to happen.
1. Record Camera
Record Camera action records alarm video for a user-defined camera or for the camera associated
with the event that triggered it. The length, picture quality, and camera position of the recording can be
defined if desired. An alarm snapshot can also be taken by this task.
When New — Action — Record Camera is selected the right panel will be populated with configuration
settings specific to the action. To configure the action:
1) Define Camera
1. Choose camera to configure from the Camera drop-down list (Fig 72).
2. When camera is selected, click on the Connect/Stop toggle-button in order to connect to the
selected camera (click again to disconnect). On successful connection live video from the camera
will appear.
9 This connection is temporary and allows the camera’s settings to be configured and
checked.
9 PTZ camera preset positions are only available if the connection is established.