User guide

DETEXI NVR 107 - 169
5. Or select a preset position from drop-down list and click Go to Preset to set camera in the selected
position.
Fig 74. NVR Control Center — Tasks
(Configure Action — Record Camera — Check Camera Position.)
4) Setup Recording
1. In the Record section setup alarm video quality and duration (Fig 75) —
9 Select Image size from the drop-down list; enter FPS and Compression %
9 Enter video duration in Frames or Sec (other parameter will be recalculated based on
configured FPS)
2. Check Take alarm shot checkbox to take an alarm shot (optional).
9 If necessary, set a Delay (ms) time between alarm detection and camera alarm shot to allow a
PTZ camera to move in the alarm recording position.
3. Check Uninterruptible alarm checkbox to prevent an alarm recording from the interruption by a new
alarm (optional).
4. Check Use local connection checkbox to connect to the camera using local IP address/port number
during Record Camera action.
9 The checkbox is only visible if the camera has both an internal and external connections
configured in the NVR Control Center — Cameras — Cameras Settings.
5. Check Append to log checkbox to append action specific information to the existing log file each