User guide

DETEXI NVR 108 - 169
time when the Record Camera action is initiated.
6. If necessary, enter a Start action in time(ms) — a delay between alarm detection and action
initialization.
Fig 75. NVR Control Center — Tasks
(Configure Action — Record Camera — Setup Recording.)
2. Move Camera
Move Camera action moves a user-defined PTZ camera to a user-defined position or preset, and can
dwell for a user-defined length of time before returning to another defined position if desired.
When New — Action — Move Camera is selected the right panel will be populated with configuration
settings specific to the action. To configure the action:
1) Define Camera
1. Choose camera to configure from the Camera drop-down list (Fig 76).
2. When camera is selected, click on the Connect/Stop toggle-button in order to connect to the
selected camera (click again to disconnect). On successful connection live video from the camera
will appear.
9 This connection is temporary and allows the camera’s settings to be configured and
checked.
9 PTZ camera preset positions are only available if the connection is established.