User guide

DETEXI NVR 110 - 169
Fig 77. NVR Control Center — Tasks
(Configure Action — Move Camera — Setup Move Position.)
3) Check Camera Position with PTZ Control
1. To bring up a PTZ control — roll over the image and click on the button in the bottom right corner.
2. Getting PTZ values of the current position of the camera click on Get PTZ (Fig 78).
3. Change camera PTZ values —
9 Or enter Pan, Tilt, Zoom values.
9 Use Zoom in/Zoom out buttons on the right of Zoom field.
9 Click on Set PTZ to set camera in a configured position.
4. Use direction buttons and Home button on the left.
5. Or select a preset position from drop-down list and click Go to Preset to set camera in the selected
position.