User guide

DETEXI NVR 111 - 169
Fig 78. NVR Control Center — Tasks
(Configure Action — Move Camera — Check Camera Position.)
d) Other Parameters
1. Check Use local connection checkbox to connect to the camera using local IP address/port number
during Move Camera action (Fig 79).
9 The checkbox is only visible if the camera has both an internal and external connections
configured in the NVR Control Center — Cameras — Cameras Settings.
2. Check Append to log checkbox to append action specific information to the existing log file each
time when Move Camera action is initiated (optional).
3. If necessary, enter a Start action in time (ms) — a delay between alarm detection and action
initialization.