User guide

DETEXI NVR 116 - 169
Fig 83. NVR Control Center — Tasks
(Configure Action — Control Relay — Define Relay.)
2) Define Camera
Toggle behavior settings (Fig 84) —
1. Turn On — toggle the output to the ON state.
2. Turn On — Dwell — Reset Relay — toggle the output to the ON, wait for defined dwell time, than
reset the output to previous state (before task was executed).
3. Turn On — Dwell — Turn Off — toggle the output to the ON, wait for defined dwell time, than reset
the output to OFF (regardless of previous state).
4. Turn Off — toggle the output to the OFF state.
5. Turn Off — Dwell — Reset Relay — toggle the output to the OFF, wait for defined dwell time, than
reset the output to previous state (before task was executed).
6. Turn Off — Dwell — Turn On — toggle the output to the OFF, wait for defined dwell time, than reset
the output to ON (regardless of previous state).
Momentary behavior settings —
7. Activate — activate the momentary behavior defined for the camera output (turn on for defined
period of time before turning back OFF).