User guide

DETEXI NVR 117 - 169
Other parameters —
8. Check Use local connection checkbox to connect to the camera using local IP address/port
number during Control Relay action (optional).
9 The checkbox is only visible if the camera has both an internal and external connections
configured in the NVR Control Center — Cameras — Cameras Settings.
9. Check Append to log checkbox to append action specific information to the existing log file each
time when Video popup action is initiated (optional).
10. If necessary, enter a Start action in time (ms) — a delay between trigger condition detection and
action initialization.
Fig 84. NVR Control Center — Tasks
(Configure Action — Control Relay — Set Parameters.)
3) Configure Camera Outputs
IP device outputs are only available for the selection if previously configured for the camera in the NVR
Control Center — Cameras — Cameras Settings — Outputs (Fig 85).