User guide

DETEXI NVR 119 - 169
Fig 86. DETEXI Client — Single Camera Live View
(Control Relay.)
9 On Fig 85 the momentary relay only has been enabled for the output — only one
relay action button is visible.
9 If multiple outputs are connected to and configured on the camera, a drop-down
list to choose the output number from will be available. When an output number is
chosen, the configured control buttons will be displayed for use.
5. Control Tour
A tour enables PTZ camera to automatically move from one pre-configured position to the next in a
predetermined order. The viewing time between one position and the next is configurable.
Control Tour action starts or stops a pre-configured tour on a specified camera for a user-defined period
of time if desired.
When New — Action — Control Tour is selected the right panel will be populated with configuration
settings specific to the action. To configure the action:
1) Define Tour
1. Select a Start Tour or Stop Tour on Camera radio button to configure an appropriate Control Tour
action (Fig 87).
2. Select camera’s pre-defined tour from the active drop down list.
9 A PTZ camera tours are only available for the selection if previously configured for the camera
in the NVR Control Center — Tour — Setup Tour.