User guide

DETEXI NVR 120 - 169
3. When tour is selected, click on the Connect/Stop toggle-button in order to connect to the selected
camera (click again to disconnect). On successful connection live video from the camera will appear.
9 This connection is temporary and allows the camera’s tour settings to be configured and
tested.
4. Show Locally checkbox can be checked to connect to the camera using local IP address and port
number (during configuration time only).
9 Show Locally checkbox is only visible if camera has both an internal and external connections
configured in the NVR Control Center — Cameras — Cameras Settings.
Fig 87. NVR Control Center — Tasks
(Configure Action — Control Tour — Define Tour.)
9 The NVR Tour service should be running and monitored by the Monitor service in
order to enable cameras touring. All NVR services are visible and configurable in
the NVR Control Center — Monitor
9 Tour service moves PTZ cameras through a predefined series of locations
according to defined schedules or on alarms or events.