User guide

DETEXI NVR 123 - 169
4) Setup Tour
A PTZ camera tours are only available for the selection if previously configured for the camera in the NVR
Control Center — Tour — Setup Tour.
Relay Action buttons will be available on the DETEXI Client’s camera live view allowing for external devices
(relays) to be triggered (Fig 90).
Fig 90. NVR Control Center — Cameras — Tour
(Configure Action — Control Tour — Setup Tour.)
9 For more information, refer to the NVR — Managing Cameras — Configure
Tour section.
6. Execute Program
The Execute Program action allows you to execute any external program to do whatever you want and is
limited only by your imagination and the resources required to develop it. The Execute Program action
executes an external program on the NVR Server, with user-defined parameters if desired.
When New — Action — Execute Program is selected the right panel will be populated with configuration