User guide

DETEXI NVR 127 - 169
3) Video Popup
If the Message can be changed automatically checkbox was checked —
the Network Client notification alerts operator on the defined Remote DETEXI Client computer (Fig 94):
• Launches the camera in alarm video stream. Video Popup window is identical to the DETEXI
Client single camera live view and has the same navigation and other capabilities as if
operator launched this view.
• Pops up alarm-specific information window and speaks the information.
• Adds alarm information to the Alarms List and pops up the list.
• Provides access to the recorded alarm video (Get Alarm button). If alarm video recording was
configured in the task (Record Video action), recording starts immediately at the moment alarm was
detected.
This allows remote monitoring stations (Remote DETEXI Clients) to become immediately aware of a
change in a monitored environment and respond to things that occur.
Fig 94. Remote DETEXI Client
(Network Client Alert Notification — Video Popup.)
4) Alarm List
To launch a live video popup from the Alarm List (Fig 95) —
1. Select a camera from the cameras drop-down list at the bottom.
2. Click the Get Site button.
To launch an alarm video from the Alarm List —
1. Select an alarm from the Alarms list.