User guide

DETEXI NVR 134 - 169
6. If necessary, enter a Start action in time (ms) — a delay between trigger condition detection and
action initialization.
Fig 100. NVR Control Center — Tasks
(Configure Notification —Speak.)
Task Triggers — NVR Events and Alarms
In the NVR a trigger is a set of criteria that, when met, starts the execution of a predefined task. In order to
get advantage of receiving a notification and/or executing action defined in the task this task should be
assigned to a specific alarm/event in the NVR Control Center.
The following alarms/events can be raised in the NVR and start execution of assigned tasks:
System Health Alarms/Events
General
NVR Status Task
— (if assigned) is executed once a day at a time you can predefine by yourself. If
this task HAS NOT BEEN executed at that time it means you have to check the system.
NVR Service Health Status
— when any of the individual NVR Services encounter problems,
this event is raised.