User guide

DETEXI NVR 137 - 169
Fig 101. NVR Control Center — General — Global Settings
(Assign NVR status task.)
9 If you want to setup your own schedule with a different time interval (twice
a day or once a week or whatever you want) to send out notification that
the NVR is alive, you should create a Scheduled Task and use it for
checking if the
Reliability System is functioning properly.
2. Assign NVR Storage Errors Tasks
There are some problems that should not be tolerated. If the tasks associated with them are initiated you
have to seriously reconsider your NVR settings and/or the hardware you are using.
Writing error task initiates when the Recorder fails to record streaming data on the hard drive. It could
be because of a hard drive error, a Windows error or the Recorder could not do its job
because of lack of resources (usually an underpowered CPU).
Drive limit reached task initiates in case of free space for the system files or free space necessary for
NVR functioning becomes too low. In some circumstances the Recorder service could even be
stopped because the NVR cannot manage the given amount of information due to a lack of
system resources. In this case you should reconsider your IP-devices recording
schedule settings and /or Keep information for parameter and/or your hardware
configuration.