User guide

DETEXI NVR 143 - 169
Fig 106. NVR Control Center — General — Advanced
(Create Recorder Recovery Settings Template.)
9 If the Recovery Procedure template was created a newly created schedule will use
the template parameters as default.
5. Assign Child NVR Status Tasks in the NVR Domain (Network)
Although every NVR in the NVR Domain Controller configuration should have its own reliability settings
there is a new intercommunication layer between the NVR Domain Controller and a child
NVR, which could also fail and therefore the system administrator must be able to check its status.
To be aware weather a child NVRs are
alive and properly respond to the NVR Domain Controller you
should setup the
Task when NVR does not respond for each child NVR in the NVR network (domain).
To assign child NVR Status task do the following steps (Fig 107):