User guide

DETEXI NVR 16 - 169
9 The color of the service name indicates its status — blue while running, red while stopped.
9 Click on any service name to turn it red to stop the service or blue — to run.
The Monitor service is an internal service to start/stop other DETEXI NVR services. It is also responsible
for monitoring the health and status of all NVR Services.
9 The color of the service name indicates its status — blue while running, red while stopped.
9 The checkbox next to a service name configures how it is affected by the Monitor service. If a
service is checked, its status will be monitored and displayed.
9 Checked services will also be started/stopped along with the Monitor service.
The Monitor service is started and stopped using the Start/Stop NVR Service toggle button in the NVR
Control Center — General — Global Settings (Fig 6).
Fig 6. NVR Control Center — Monitor
(NVR services status, turning service on/off.)
9 It is recommended that the Monitor service be active at all times.
9 System will check status only for the components with the checkbox checked.
9 If, for some reason, the user stops a service and it is selected to be monitored, it
will be restarted by the
Monitor service in approximately 30 seconds.
9 During the system tuning you may need to disable restarting a service by the
Monitor service. Uncheck the service checkbox to disable monitoring. Than you
can click on the service name to turn it red to stop the service or blue — to run.