User guide

DETEXI NVR 18 - 169
developed which (if assigned) is executed once a day at a time you can predefine by yourself.
If this task HAS NOT BEEN executed at that time it means you have to check the system.
9 The main purpose of the NVR Status task is to send out the current status of the NVR
components at predefined time. It is initiated once a day at a predefined time and provides the user
a list of the NVR components being monitored and their status.
Fig 7. NVR Control Center — General — Global Settings
(Assign NVR status task.)
To assign NVR status task —
1. In the NVR Control Center switch to the General — Global Settings (Fig 7).
2. Select an appropriate predefined task from the NVR status task drop-down list.
3. Set a desired time.
9 If you want to setup your own schedule with a different time interval (twice
a day or once a week or whatever you want) to send out notification that
the NVR is alive, you should create a Scheduled Task and use it for
checking if the Reliability System is functioning properly.