User guide

DETEXI NVR 21 - 169
9 The NVR response configuration is based on the NVR Task Execution Engine.
In the NVR trigger is a set of criteria that, when met, starts the execution of
assigned task. When an event is triggered, some of the common responses can
occur, if configured. Recording occurs if assigned task includes the Record
Camera action.
9 Record Camera action records alarm video for a user-defined camera or for the
camera associated with the event that triggered it. The length, picture quality, and
camera position of the recording can be defined if desired. An alarm snapshot can
also be taken by this task.
9 Learning the NVR Event Management should allow a better understanding of how
to configure system settings including recording instructions.
4. Setup Recording Storage (Archive)
Specify where to store the images. Recordings will be deleted when the reserved hard disc space is full, or
when the recording is older than the amount of days specified in Keep Information for [ ] day(s). To
prevent the hard drive from becoming full If free space is less than and Stop Saving/Overwrite
should be set.
Fig 8. NVR Control Center — General — Global Settings
(Specify recording storage.)