User guide

DETEXI NVR 27 - 169
9 If recording on Motion Only/on Alarm is setup in a recording schedule the
compression settings will be ignored to protect alarm video quality.
9 Compression Level 0 (default) disables all compression capabilities; compression
settings in the recording schedules will be disabled.
Encoder Settings in Recording Schedule
To adjust a camera encoding settings for an existing recording schedule (Fig 11) :
1. In the NVR Control Center — Cameras select camera to configure from the Cameras List and
switch to the Recording.
2. Select a recording schedule and switch to the Encoder tab.
3. Adjust encoder settings — Use Defaults button will be enabled indicating that the encoder settings
differ from those defined in the template. Click the button to return default settings.
4. Click Save button below the schedules list to save the updated recording schedule.
Fig 11. NVR Control Center — Cameras — Recording
(Recording Schedule Encoder Settings).