User guide

DETEXI NVR 34 - 169
4. Add Task Execution to User Permissions
User Triggered Task — task execution can be added to user permissions, by assigning users the specific
tasks they are allowed to trigger manually from the remote DETEXI Client.
1. In the NVR Control Center go to the Users.
2. Select a user from the Users Llist and switch to the Tasks (Fig 15).
3. Select a task of interest in the Available list and press the direction button to move the selected
task to the Selected list.
4. Add more tasks to the Selected list if necessary.
5. Press Save button under the Users list to save changes.
Fig 15. NVR Control Center — Users — Tasks
(Assign User Triggered Task.)
9 Tasks configured with alarm-specific information should not be assigned as no
alarm-specific information will be available.