User guide

DETEXI NVR 60 - 169
3. In order to change the camera position you can —
9 Click anywhere on the image to pan, tilt camera
9 Enter Zoom value and press Zoom button to zoom camera in/out
9 Press Home button to set camera in a h o m e p o s i t i o n
9 Enter Pan, Tilt, and Zoom values or select a preset position from Preset drop-down
list and press Goto Preset/PTZ button (no value equal 0).
4. To add a new position to the tour — click the Add button below the positions list and enter Stay
in this position for (sec) when asked — the name appears in the list (position will be named
based on the defined settings).
5. If more than 2 positions were added the Build Loop button activates. Click the Build Loop
button to add a backward camera positions to the tour.
6. Click the Test Tour/Stop Tour toggle button to test new tour (click once more to stop).
7. Press Save button below the tours list to save the tour.
Fig 35. NVR Control Center — Cameras — Tour
(Configure Tour.)