User guide

DETEXI NVR 61 - 169
2. Setup Tour Schedule
After one or more tours were configured for the camera you can also schedule what tours (if any) should be
activated during different days of the week and times of the day.
1. In the NVR Control Center — Cameras select a PTZ camera from the Cameras List and switch
to the Tour — Setup Schedule (Fig 36).
2. Press Add button below the schedules list to add a new schedule.
3. Leave No Time Restrictions radio button selected, and leave all days of the week
checkboxes checked to configure a 24/7 continuous touring;
— OR —
Select the Restricted Between radio button and define a time range FROM - TO and leave
proper days of the week checked to have the tour repeated these days only.
4. Select a p r e d e f i n e d t o u r from the Tour drop-down list the schedule will be applied to.
5. Check Use locally (without Proxy) checkbox to connect to the camera using l o c a l I P
address/port number during touring (optional).
9 The checkbox is only visible if the camera has both an internal and external connections
configured in the NVR Control Center — Cameras — Cameras Settings.
6. Press Save button below the schedules list to save the schedule.
7. Repeat the steps to add more schedules and save.
Fig 36. NVR Control Center — Cameras — Tour
(Configure Tour.)